HIRESS INTERNATIONAL LTD.

High Quality, Professional & Unlimited Supplies from China...

• New type computerized ultrasonic generator

• Bottom pattern rotate simultaneously

• Two motors to control speed adjustment

• Manual (pneumatic for option) pattern lifting device

• multifunction pattern bracket and horizontal minus adjusting device

• imbedded chip, multi ultrasonic protection system

• This machine can cut material for single piece or many pieces at the same time. Moreover it can carry out the treatment of side melting. There is no coarse side.

• The machine is suitable for patterning with precious stones on ornaments, such as clothes, bags and hats, which are made of material like velvet cloth, jeans and leather or similar materials.
• The machine adopts single-clip machine to control the operation, the whole progress has achieved intelligence operation.
  1. Human-oriented Chinese LCD Display and touch control panel.
• Accurate positioning of the laser light: accurate positioning can be achieved as long as the operator moves the fabrics toward the laser of machine.
• The machine adopts ultrasonic weld and it can prevent the work piece from being damaged.
• A spring is provided in the welding part, and it can protect the precious stone from being crushed.
• The machine can operate continuously and the diameters of applicable precious stones are:2mm-4mm.

• This model use advanced temperature controlling system (PID) to adjust precisely, use PLC controlling system, and use servo motor which controlled by micro-computer, precise slight reverse function, 3-position hot air adjusting device and vibration system.

• auto tape cutting system, sealing trail neatly

• auto tape feeding device and tension regulator, assures the tape feeding smooth

• auto temperature controlling, max up to 800C+-2C

• cooling system set outside of the hot air pipe

• hot air pipe and heater are protected by inner super static wind machine

• the pressure for upper and lower roller can be adjusted

• adjustable tape feeding length

• bevel angel make operation convenient and for different materials

• manual feeding & cutting system and manual reversing system was set outside (inner set fully auto system)

• this machine can work 24 hours continuously, there's an auto cooling system inside

• Speed adjustable from 5--30m/minute

• Adapting to melt the waterproof shoes, gloves and hats, the pressure rubber to suture.
• Depend on the technological requirement, the lower column can be adjusted by initiative/passive
• The lower column ascent design, convenience operator line of sight and with ease carries on presses the rubber to suture the work .
• Fully auto-controllable micro-computer.
• The speed can be adjusted, velocity adjust from 5 to 36 meters per minute
• Hot air pipe and heater are protected by inner superstatics wind machine, prolong the using life, and the wind can be adjusted
• The upper pole pressure can be adjusted, for seaming and melting the different thickness material
• Special pitch of the machine head which conform to the human project, in order to operate convenient and avoid wrapping the material
• Auto slightly back function, eliminate unsealed tape blank when stopped; The water pressure is also strengthen
• Auto tape cutting system, sealing trail orderly; Auto tape feeding and the length of the tape can change
• There is a device cover the hot air pipe, in order to destroy the

HR-3300 HOT AIR SEAM SEALING MACHINE

• “L” type of lower pole, for purpose of the hot-melt of the whole clothes.

• It is convenient for high-speed operation .

• The working pad can be loaded and unloaded freely.

• Fully auto-controllable micro-computer.

• The upper pole pressure can be adjusted, for seaming and melting the different thickness material

• Special pitch of the machine head which conform to the human project, in order to operate convenient and avoid wrapping the material

• Auto slightly back function, eliminate unsealed tape blank when stopped; The water pressure is also strengthen

• Auto tape cutting system, sealing trail orderly; Auto tape feeding and the length of the tape can change

• There is a device cover the hot air pipe, in order to destroy the material and scald. 

HR-4410 MOBILE OR STATIONARY HEAT SEALING MACHINE FOR HOT-AIR AND/OR HOT-WEDGE OPERATION FOR DIRECT WELDING OF HEAVY, LARGE FLEXIBLE THERMOPLASTIC MATERIALS

• The working pad can be loaded and unloaded freely, for purpose of the operation of ultra a big-ticket item.

• Escaping the burn of the over-thin material.

• Lower arm can be opened and closed automatically.

• This machine is specialized in the garments of chemical-proof, medical clothing and the no-weaving material.

• Fully auto-controllable micro-computer

• The speed can be adjusted, velocity adjust from 5-36 meter per min
  
  　

HR-5500 HOT AIR SEAM SEALING MACHINE  

• Automatic double-functional interchangeable arm.

• The sewn characteristics of diving trousers and shoes.

• The working pad can be loaded and unloaded freely.

• Fully auto-controllable micro-computer.

• The speed can be adjusted, velocity adjust from 5 to 36 meters per minute

• Hot air pipe and heater are protected by inner superstatics wind machine, prolong the using life, and the wind can be adjusted

• The upper pole pressure can be adjusted, for seaming and melting the different thickness material

• Special pitch of the machine head which conform to the human project, in order to operate convenient and avoid wrapping the material

• Auto slightly back function, eliminate unsealed tape blank when stopped; The water pressure is also strengthen.

• Auto tape cutting system, sealing trail orderly; Auto tape feeding and the length of the tape can change

• There is a device cover the hot air pipe, in order to destroy the material and scald.

HR-5502 HOT AIR SEAM SEALING MACHINE 

• Operation by all-around orientation

• Different angles and ideal effects

• Special 180 degree rolling of the lower working room.

• One touch screen board is for optional. 

HR-5701 FEED-OFF-THE-ARM FOR OVERLAP SEAMS HOT AIR SEAM  SEALING MACHINE 

• Hot air for continuous seam-sealing of water-prevent, waterproof and breathable materials

• High production speed

• Extra large room for big parts

HR-8026 NON-SEWN CONGLUTINATION MACHINE OF THE ZIPPER

• Mainly used in the sealing and melting of the water wear, leisure wear, raincoat, waterproof zipper, brand hot melt film, sleeves, shoes and waterproof bags

• Stand-up design, operated by foot, automatic operation, and long time working

• Auto controllable warm-up, the temperature can be adjusted for different material

• The heat pad is made by aluminum, and the even heat-up.

• The heat-up pad is galvanized with high-temperature silicon glue, for escaping melting the film or the material.

• Adapting to melt the oblong and the hunch area material.